A tension pole, also called a pressure-mounted pole, is a dance pole that stays up by pressing against your floor and ceiling. Nothing is screwed in: an adjuster pushes the pole sections apart until the pole sits tightly in place.
How does a tension pole work?
It works a bit like a very strong tension rod. There is a base on the floor, a dome or disc at the top and an adjuster that creates the pressure. Lupit puts the load a pole creates at around 80 to 120 kg, which is why the ceiling and floor have to be able to push back. Most portable home poles, such as the Lupit Classic G2, are built this way.
Why do so many people choose one?
- No drilling: you can set it up and take it down again, which makes it a natural choice for renters.
- Portable: when you move, the pole moves with you.
- Both modes: many tension poles switch between static and spinning mode.
Which ceilings work?
Concrete is usually the easiest case. With wooden beams or joists, the dome should sit under a joist. Plasterboard can flex and is not recommended without reinforcement, and suspended or false ceilings are not suitable. Very high ceilings are a special case too: X-Pole states that pressure-mounted poles need a permanent mount above 12 feet. Our guide to poles without drilling goes through every ceiling type, and ceiling height for a pole covers the measurements.
Check it before every session
Grab the pole firmly and pull and push it in different directions. It should not shift, rattle or wobble at the top or bottom. Check that the joints are tight and the dome and base sit flat. Our step-by-step guide on how to set up a pole has the full checklist.
No suitable ceiling at all? A freestanding stage pole is the alternative.
Which tension pole should you buy as a beginner? Our buying guide to the best dance pole for beginners compares the main models.
